Learning Outcomes

Magnetism  Basics

Geomagnetism

Measurement of Magnetic Fields

Classification of Magnetic Materials

Lesson Summary

In this module, you will learn about the types of magnets and their properties. An analysis of the magnetic field and field lines of force will also be carried out. The module also looks into geomagnetism, the measurement of magnetic flux, and permeability. The classification of magnetic materials into various types will also be explained.

Magnetism - Electrically Induced

Electricity - Magnetically Induced

Eddy Current and Galvanometers

Magnetically Induced Force on a Current-Carrying Wire

This module explains magnetically induced electric current and the different magnetization methods. An introduction to electromagnetic induction and its laws and an understanding of eddy current and galvanometers are also discussed. Finally, magnetically induced forces on a current-carrying wire are described.

Basic Concepts of Electrical Theory

Circuit Parameters - Resistance

Electric Circuits and Inductance

Capacitors and Capacitance

Laws of Electric Current and DC Circuits

Static Electricity and Stray Currents

This module will take you through the definitions of key terms and basic formulas of electrical theory. An analysis of the key circuit parameters and an understanding of the basic laws and effects of electricity will be developed. Finally, an analysis of hazards and safety procedures will be provided.

Fundamentals of Electrical Technology - First Assessment

To pass this assessment, you must score 80 percent or above. 

However, if the required outcome is not achieved after the first attempt, you can retake the assessment until a successful outcome is achieved.

Electrical Circuits - Resistors

Inductors and Capacitors

RL and RC Circuits

RLC Circuits and Power Factor

This module will take you through the main elements of electrical circuits: Resistors, inductors, and Capacitors. You will look at these elements in both series and in parallel. An analysis of these elements in combination with A.C. circuits will also be a part of our studies. A discussion on RL, RC, and RLC circuits will also be provided.

Alternate Current Theory

Phasor Representation

Network Elements

Analysis of Circuits

Three-Phase Systems

This module takes you through the key concepts and theories of electricity and its application. The learner will be discussing alternate current theories. A detailed analysis of various waveforms will be carried out. Explanation of different network elements, circuits, and three-phase systems will be a key part of the learner's progress.

Fundamentals of Electrical Technology - Second Assessment

In order to pass this assessment, you will need to score 80 percent or above. 

However, if the required outcome is not achieved after the first attempt, you can retake the assessment until a successful outcome is achieved.

Diploma in Electrical Technology - Final Assessment

Develop solid foundational knowledge of the fundamentals of electrical technology in this free engineering course.

Diploma in Electrical Technology

Imagine having to live your day-to-day life without electricity. Everything around us is dependent on electricity: from our homes to workplaces, the way we watch our TVs to how massive factories are run. This online course gives you all the basic concepts, theories and applications of electricity that can become the building block of your study on this subject. So don't wait to enrol for free - begin your learning journey today!

The modern world is a place that simply cannot exist without the phenomenon of electricity. It is a primary requirement everywhere, whether it’s schools, workplaces, factories or our homes. An understanding of electricity and its fundamentals is hence of prime importance especially for professional technicians. If you are looking to gain an understanding of or revise your knowledge of the building blocks of electrical technology, then you have come to the right place. This course is designed to develop a comprehensive understanding of the rudimentary concepts of electrical technology. It kicks off with the basic concepts of the various types and properties of magnetism. The use of the Earth’s magnetic field, along with the various types of magnetic materials, are discussed. Having studied magnetism, we now move on to the interaction between electricity and magnetism. Electrically induced magnetism and magnetically induced electricity will be analyzed in detail, along with key illustrations, diagrams, and formulas for better understanding. Electrical items such as galvanometers, toroids and solenoids will also be discussed and explained with clear illustrations.
Are you familiar with atoms, electrons and neutrons? Or the definitions and formulas of everyday terms like work, energy and power? These are the building blocks we cover next in the course. An introduction to the most basic particle, called the atom, will be described. Along with atoms, the learner can also investigate charges and their use in generating electricity. Current is a word we are all familiar with, but this course will help properly define the term and its uses. Then, the learner will move on to the key topic of circuit parameters: resistance, inductance and capacitance. The definitions, types, measures and uses of all three parameters will be discussed in detail. The basic laws of electric current and DC circuits will also be analyzed. Have you ever been in a hazardous situation at home or the workplace involving electricity or electric current? This course will provide all the information regarding the hazards of electricity and the necessary preventive measures in order to protect yourself and those around you from them.
It is extremely rare to find an electrical appliance these days without a resistor, capacitor or inductor within it. These devices and their functionality are a key part of electrical technology. The learner will be analyzing these components individually and their combinations with AC circuits in both series and parallel combinations. Towards the later section of the course, the discussion moves towards AC voltages and distinguishing between various network elements. Circuits will be analyzed in detail including three-phase circuit systems. These circuits and elements will be described along with their key formulae, diagrams and illustrations to make sure you fully understand these basic concepts. The use of electricity has become so common in today’s world that one often takes these basic concepts for granted. However, after going through this online course, you can not only apply them in your professional life but also in your daily life with the electrical appliances surrounding us. So don’t waste any more time - start your learning journey with this free online course!

6 Best Node.js Courses in 2025

BloomTech’s Downfall: A Long Time Coming

Udemy vs Coursera: Comparing Online Learning Giants that IPO’d in 2021

Coursera and Udemy are Finally One. What’s Next?

[2025] 2000+ Free SWAYAM + NPTEL Courses

70+ FutureLearn Courses with Free Certificates

12 Best Laravel Courses for 2026: Ship Sites Fast

30 Hours of MATLAB Courses with Free Certificate

Harvard Launches Two New Free Certificate Courses

10 Best Assembly Language Courses for 2025: Bare-Metal Programming

Udemy’s Last CEO Quietly Moves On: Joins a Tax & Compliance Company as CEO

10 Best Free Rust Courses for 2025: Write Memory-Safe Code

Learn Something New: 100 Most Popular Courses For December

Udemy Announces Layoffs Without Saying ‘Layoffs’

Coursera Q4 2025: 197M Learners, ~$197M Revenue, ~$27M in Losses

Coursera, Udemy, and the $10M+ Video Privacy Battle: Class Action Update

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.